Tired our your cup rolling around your craft table while you try to apply vinyl. Stop using your legs to hold it still and DIY this cup cradle with supplies found at the local hardware shop.
This post may contain affiliate links.
Are you tired of your cup rolling around, while you’re trying to apply vinyl? After years of struggling with this, I found the best solution. DIY Cup Holder. All you need are a couple supplies from the local hardware store. It will cost less than $10, and take less than 30 minutes to make.
Cup Cradle Supply List:
– 5 Foot 1/2 inch PVC Pipe cut to:
– (8) 1 inch pieces
– (4) 10 inch pieces
– (8) 1/2 inch PVC Elbows
– (2) 1/2 inch PVC Cross Tee
– 6 Foot 1/2 inch Foam Plumbing Tubular Insulation cut to:
– (4) 8 inch pieces
Optional, but helpful:
– PVC Pipe Cutter
– Measuring Tape
First, go to your local hardware supply store and gather all your materials.
Then, cut to size.
Next, Puzzle piece them together (as shown in the video).
Not interested in making your own, but would like to purchase one. I found one on amazon that is a bit different, but the same concept. Check it out here.
If you make a cup holder and post it on social media, I would love to see it! Don’t forget to tag me @brinnykdesign or use #freesvgfriday to be featured on my page!
© brinnykdesign, 2021. All images, designs and text are copyrighted and cannot be copied.